Adapters 12AD

12ADA

Up to 12 W Mounting with self-adhesive tape Stabilized output voltage Output voltage range from 3,1 V to 48 V Input – line twin-lead with double insulation Output – isolated twin-lead Protection IP20

These converters are intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Output is galvanically separated, therefore it is possible to use them as power supplies of negative voltage, eventually by connecting multiple converters together to use them as power supplies of symmetrical voltage or multi-level power supplies. Output voltage can be in range from 3,1 V up to 48 V.

Nominal output voltages and corresponding max. currents are listed in table below. The converter is protected against short-circuit on output. Connection of input lines is realized through twin-lead with double insulation. On the output there is a black-red twin-lead.

The method of mounting without usage of tools and such operations as drilling is usable to advantage especially with additional installation into electric and electronic devices, e.g. placing the power supply directly into camera cover.

Table 1: Technical data     Input voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP20 Dimensions 55 × 41 × 45 mm Weight 80 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokuments   Leaflet 12ADA Leaflet for all 12AD adapters Declaration of conformity

Table 2: Models of AC/DC converter 12ADA

Type of connectors on output wire:

Type .00 – without connector Length of output wire is 30 cm.	Type .04 Length of output wire is 30 cm.	Type .06 Length of output wire is 30 cm.
	Type .05 Length of output wire is 30 cm.	Type .07 Length of output wire is 30 cm.

12ADR
	Up to 12 W DIN rail mounting Stabilized output voltage Output voltage range from 3,1 V to 48 V Input – screw clamp Output – screw clamp Protection IP00

 

These converters are intended for general use to feed electric and electronic devices in covered rooms, in environments without risk of explosion. Output voltage can be in range from 3,1 V up to 48 V. The power supply is designed to be mounted on a DIN rail, which predetermines its usage in a distributor box. The connection of input and output wires is realized through screw clamps. Input and output clamps are not protected against touch to dangerous voltage. This protection must be provided by the customer.

 

Nominal output voltages and corresponding max. currents are listed in table below. The converter is protected against short-circuit on output.

 

Tabuľka 1: Technical data Input voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP00 Dimensions 56 × 47 × 39 mm Weight 85 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokuments Leaflet 12ADR Leaflet for all 12AD adapters Declaration of conformity All documents

 

Table 2: Models of AC/DC converter 12ADR

	Output voltage	Output current	Stability	Ripple	Noise
12ADR030/10	3,1 V	1 A	2 %	<70 mV	<100 mV pp
12ADR050/10	5 V	1 A	2 %	<70 mV	<100 mV pp
12ADR069/10	6,9 V	1 A	2 %	<70 mV	<100 mV pp
12ADR090/10	9 V	1 A	1 %	<50 mV	<100 mV pp
12ADR120/10	12 V	1 A	1 %	<50 mV	<100 mV pp
12ADR138/08	13,8 V	0,8 A	1 %	<50 mV	<100 mV pp
12ADR150/07	15 V	0,7 A	1 %	<60 mV	<100 mV pp
12ADR180/06	18 V	0,6 A	1 %	<60 mV	<100 mV pp
12ADR240/04	24 V	0,4 A	1 %	<60 mV	<100 mV pp
12ADR276/03	27,6 V	0,3 A	1 %	<60 mV	<100 mV pp
12ADR480/02	48 V	0,25 A	1 %	<70 mV	<100 mV pp

 

12ADS
	Up to 12 W Adapters can bo plugged to electric outlet Stabilized output voltage Output voltage range from 3,1 V to 48 V Output – isolated twin-lead Protection IP20

Meniče sú určené k všeobecnému použitiu na napájanie elektrických a elektronických zariadení jednosmerným napätím v krytých priestoroch bez nebezpečenstva výbuchu. Výstupné napätie môže byť z rozsahu 3,1 V až 48 V. Adaptéry sa vyznačujú malou hmotnosťou a vysokou účinnosťou.

Menovité výstupné napätia a príslušné max. výstupné prúdy sú uvedené v tabuľke. Menič je chránený proti skratu na výstupe.

Tabuľka 1: Technical data     Input voltage 195 - 255 V AC Operating temperature -15 °C až +40 °C Short-circuit protection on output <1 min. (short-term) Insulation voltage 3000 V AC Protection IP20 Dimensions 55 × 41 × 45 mm Weight 90 g Electrical safety standard EN 60950-1:2003 EMC EN 55011+A1:2002 EN 61000-3-2:2002 EN 61000-3-3:2000+A1:2003 EN 61000-6-1:2003

Dokuments Leaflet 12ADS Leaflet for all 12AD adapters Declaration of conformity All documents

Table 2: Models of AC/DC converter 12ADS

	Output voltage	Output current	Stability	Ripple	Noise
12ADS030/10.xx	3,1 V	1 A	2 %	<70 mV	<100 mV pp
12ADS050/10.xx	5 V	1 A	2 %	<70 mV	<100 mV pp
12ADS069/10.xx	6,9 V	1 A	2 %	<70 mV	<100 mV pp
12ADS090/10.xx	9 V	1 A	1 %	<50 mV	<100 mV pp
12ADS120/10.xx	12 V	1 A	1 %	<50 mV	<100 mV pp
12ADS138/08.xx	13,8 V	0,8 A	1 %	<50 mV	<100 mV pp
12ADS150/07.xx	15 V	0,7 A	1 %	<60 mV	<100 mV pp
12ADS180/06.xx	18 V	0,6 A	1 %	<60 mV	<100 mV pp
12ADS240/04.xx	24 V	0,4 A	1 %	<60 mV	<100 mV pp
12ADS276/03.xx	27,6 V	0,3 A	1 %	<60 mV	<100 mV pp
12ADS480/02.xx	48 V	0,25 A	1 %	<70 mV	<100 mV pp
.xx – this number specifies type of connector on output wire

Type of connectors on output wire:

 

Type .00 – without connector Length of output wire is 1,5 m.	Type .04 Length of output wire is 1,5 m.	Type .06 Length of output wire is 1,5 m.
Type .02 – car connector Length of output wire is 5 m.	Type .05 Length of output wire is 1,5 m.	Type .07 Length of output wire is 1,5 m.

Usage of car connector .02: Using car connector, e.g. for 13,8 V power supplies of type 12ADS makes it possible, among other, to maintain accumulators in charged state directly in vehicle through lighter connector or through specially for this purpose led out connector. It can be used to advantage with fire service vehicles, that have to be always ready to drive out and while parking startup accumulators lose capacity due to self discharge and in winter also because of low temperature.